Home About Us Proven Reliability Engineering Criteria Brochure Policies Contact
Pricing & Ordering
Request Pricing
 
Framing Clamp SystemSuspension Clamp SystemBridging Clamp System  
 
Girder Clamps are designed to secure tubing directly below and perpendicular to the roof deck flutes. Each Girder Clamp is designed to occupy the 2 1/2” gap between the girder and the roof deck. These clamps hold tubing even with the bottom of the roof deck, allowing installers to easily support units around girders.

Framing Clamp Systems
FCS Tube Frame
Demonstration Video
End Clamps
T Brackets
Cross Tube Clips
Complex Support Application
Inline End Clamps
Cross Support Brackets
Girder Clamps
Main Tube Clips
Live Load Capacity Table
& Dimension Requirements
Traditional vs
CCC New Standard
Engineering Criteria
Installation Guide
Girder Clamp shown in custom colors
 
 

NOTE: Modification or additional loading of any structure must be reviewed by a structural engineer. Each Chicago Clamp Systems® (CCS) application must be selected under direction and installed under supervision of a structural engineer. CCS does not increase load capacity of any structure. Chicago Clamp Company (CCC) takes no responsibility for the load capacity of any building. Only use components provided by CCC.

© 2007 Chicago Clamp Company