Welcome to Chicago Clamp Company

End Clamps slide over bar joists or wide-flange beams with a maximum top chord width of 9”. They fit under the corrugations of the roof deck, occupying a 1 1/4” high by 2 1/2” wide space. Each End Clamp is rated for 750 lbs, giving a complete system a 3,000 lb distributed load capacity. Tubing is inserted and then secured with Grade 5 carriage bolts to each End Clamp.

Framing Clamp Systems

Complex Support Application

Inline End Clamps

Cross Support Brackets

Girder Clamps

Main Tube Clips

Live Load Capacity Table

& Dimension Requirements

End Clamp shown in custom colors

NOTE: Modification or additional loading of any structure must be reviewed by a structural engineer. Each Chicago Clamp Systems® (CCS) application must be selected under direction and installed under supervision of a structural engineer. CCS does not increase load capacity of any structure. Chicago Clamp Company (CCC) takes no responsibility for the load capacity of any building. Only use components provided by CCC.