Welcome to Chicago Clamp Company

End Suspension Clamps anchor the ends of back-to-back angles to the top or bottom joist flange. Midspan Suspender Clamps are installed along the angle span to hang objects such as ceiling fixtures, conveyers, or HVAC equipment from threaded rods. Suspension Clamp Systems can be combined with Bridging Clamp Systems for increased flexibility in load and suspension placement. Customer is to supply Angles. Suspension Clamps have 11/16'' holes for 5/8'' threaded rods (purchase separately).

Suspension Clamp System

Angle Application

Channel Application

Live Load Capacity Table




Suspension Clamp Systems shown in custom colors

NOTE: Modification or additional loading of any structure must be reviewed by a structural engineer. Each Chicago Clamp Systems® (CCS) application must be selected under the direction of a structural engineer. CCS does not increase load capacity of any structure. Chicago Clamp Company (CCC) takes no responsibility for the load capacity of any building. Only use components provided by CCC.