Home About Us Proven Reliability Engineering Criteria Brochure Policies Contact
Pricing & Ordering
Enter Store
 
Framing Clamp SystemSuspension Clamp SystemBridging Clamp System  
 
Maximum width of center bar joist is 1 3/4”; Maximum height of lower bar joist is 3”; Maximum distance between panel points on bottom cord is 4 ft; For use with 2”x 3”x 1/4” angles only; For use with angle iron joists only.

Bridging Clamp System
Bridging Clamp Detail
Dimension Requirements
Traditional vs
CCC New Standard
Engineering Criteria
Installation Guide

 
 

NOTE: Modification or additional loading of any structure must be reviewed by a structural engineer. Each Chicago Clamp Systems® (CCS) application must be selected under the direction of a structural engineer. CCS does not increase load capacity of any structure. Chicago Clamp Company (CCC) takes no responsibility for the load capacity of any building. Only use components provided by CCC.

© 2007 Chicago Clamp Company