Utilizing 30 years
of engineering experience, Chicago Clamp Company was founded with
the mission to create a new, safe, structurally-reliable, and
economical standard for framing roof openings and supporting and
distributing loads from joists. For decades, contractors have
used traditional welding and cut-angle methods. These methods
require certified welding which can be expensive, complicated,
and hazardous; if done incorrectly it can compromise the integrity
of the joist. To eliminate these inherent project risks, Chicago
Clamp Company has developed three easy-to-install Clamp Systems.
Each of these Chicago Clamp Systems®
preserves the integrity of trusses and saves installation time
and money.
 |
 |
 |
Tube Framing Clamp System
"Aramark Uniform Services has used the Tube Framing Clamp System for providing the deck support on six different roof openings at our facility in Toledo, Ohio. Each set-up was easy to
install and went up quicker than I expected. The fact that we did not have to weld your system
in place was a main factor in our decision. It allowed for our operations to continue during
construction with very limited interruption.
We have now ordered your system for two separate in-house projects and will certainly look forward to work with it again.
– William P Saba Sr., Aramark Uniform Services
|
 |
Tube Framing Clamp System
"We had great feedback from the field. Thanks for your help with this job. We look forward to working with you again."
– Pat Heywood, GT Mechanical Projects & Design, Inc |
 |
Tube Framing Clamp System
"Our field personnel stated that the frames we purchased from you went in pretty easily, and it took a lot less time than a typical frame. Your frame setup worked perfectly for our application."
– Benji Presser, icon Mechanical |
 |
Tube Framing Clamp System
"We have used the Tube Clamp System on two jobs now and are getting ready to place our third order. This product has substantially cut down the installation, layout and ordering time usually required to provide structural support for the mechanical systems we install. No prefabrication required. No drilling or welding required in the field. When I first saw the system I could see how good it would work for us. It is easily saving us 50% or more over previous costs.”
–
Russell Geiger, TEMCO |
 |
Tube Framing Clamp System
"The guys in the field, they loved that system and it went very well. We would love to use that again some time. I’ll put your name in my rolodex.”
–
Jill Richter, Total Mechanical |
 |
Tube Framing Clamp System
“We had no problems and we will recommend your system when we can.”
– Stan Haberski, Bonazzoli Corp. |
 |
Tube Framing Clamp System
“Installation was a breeze and rooftop is in place. My people really liked the quality of your product and made sure to let me know that they prefer this method of support in lieu of all that goes into welding, fire watch, tarp protection and such.”
– Brian Crispin, All Seasons Mechanical |
 |
Channel Framing Clamp System
“Ordering and timely delivery were great on my end. It’s a great product and we will use it again when we have a similar situation on the job site. Thanks again.”
– William Galligan, Amaral Associates |
|
Reader's Choice Awards, Magazine
Metal Construction News, August 2011
View
Article (pdf 263K)
|
|
|
Featured Products
Metal Construction News, April 2011
View
Article (pdf 178K)
|
|
2009 Top New Products
metaImag, October 2009
View
Article (pdf 220K)
|
|
Best
New Product - Third Place , Framing Clamp System - Tube
Frame
2009 International Roofing Expo
View
Award (pdf 358K)
|
|
New
Suspension Clamp System
Contracting Business, December 2008
View
Article (pdf 207K) |
|
Framing
Clamp System has 1,000 lb capacity per end clamp.
Industrial Equipment News, November
2008
View
Article (pdf 290K) |
|
Chicago
Clamp Company introduces new Suspension Clamp System
Air Conditioning Today, December
2008
View
Article (pdf 381K) |
|
Hanging
from the Rafters
Modern Steel Construction, September
2008
View
Article (pdf 243K) |
|
Award
Winning Product Framing Clamp System
Air Conditioning, Heating & Refrigeration
the NEWS, 2008 Dealer Design Awards
View
Award (pdf 263K)
Dealer
Design Products |
|
Chicago Clamp Company Introduces New Framing Clamp System
Chicagoland HVAC & Refrigeration
Insider, July 2008
View
Article (pdf 187K) |
|
This
Month's Innovative HVAC Equipment
Indoor
Comfort News, June 2008
View
Article (pdf 287K) |
|
Framing
Clamp: No Welds
ENR Engineering News-Record, McGraw
Hill Companies,
June 23rd, 2008 |
|
